Scope Of Delivery; Functional Description; Putting Into Operation - Abicor Binzel TSi Instructivo De Servicio

4 Scope of delivery

4 Scope of delivery
• TSi injection unit
• Device fastener incl. mounting screws
• Device fastener
• Mounting screws x 2 M6
Tab. 5 Scope of delivery
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current catalogue. Contact details
for advice and orders can be found online at www.binzel-abicor.com.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk of transport
damage.
Goods-in inspection
In case of complaints
Packaging for returns
Tab. 6 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-6

5 Functional description

The injection process is triggered automatically as soon as a welding torch is moved vertically into the injection position. The
TSi injection unit injects an allotted amount of release agent into the cleaned welding torch as a preventive measure to protect
against the adhesion of spatter.

6 Putting into operation

DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing, assembly, disassembly and repair
work:
• Close the compressed air supply.
NOTICE
• Please take note of the following instructions:
 3 Product description on page EN-5
• The system may only be installed and put into operation by qualified personnel
(in Germany see TRBS 1203).
• The rubber seal is mounted Ø 24 mm ex works. Please see the following section when replacing the rubber seal:
 9.4 Replace rubber seal on page EN-16
EN - 8
• Rubber seal (Ø 20; Ø 24; Ø 30)
Ø 24 is mounted ex works
• Release agent bottle fastener incl. mounting screws
• Release agent bottles (empty)
• Operating instructions
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last carrier
immediately. Retain the packaging for potential inspection by the carrier.
Where possible, use the original packaging and the original packaging material. If you
have any questions concerning the packaging and/or how to secure an item during
shipment, please consult your supplier.
TSi injection unit
BAL.0468.0 • 2019-11-04