Troubleshooting - Klarstein 10032012 Manual De Instrucciones

TROUBLESHOOTING

Problem Possible Cause
No cooling. Plug not put in.
Low voltage.
Fuse broken.
Not cold The wine cooler is placed too
enough near heat source.
temperature
Bad ventilation.
inside.
Fans don't work.
The door is not closed tightly or
opened too frequently or for too
long time.
Inside light Set temperature higher than
flash. inner temperature.
The automatic defrost function
start to work.
Frost on the Too much humidity or too low
cold sink. temperature inside the case.
Solution
Put in the plug.
Ensure normal voltage.
Change fuse.
Keep the wine cooler away from
sunshine or other heat source.
Place the wine cooler in the area
with good ventilation and keep
things away from the fans.
Check whether the plug is
connected or change the fan.
Close the door tightly and don't
open the door too frequently or
for too long time.
Adjust the adjustor.
Normal function. No repair
needed.
Output the plug, stop the power,
and defrost by hand, Connect
power again when the ice thaws.
EN
13