Care And Cleaning - Everbilt EBAU25-PCP Manual Del Usuario

Care and Cleaning

Do
□ When the power is disconnected, inspect the pool
cover base and the pump intake screen (bottom of
pump) and remove all debris, then plug the pump
back into the grounded outlet.
To clean a pump clogged with debris:
□ Unplug the pump from electrical power.
□ Remove the screws (if used) and pool cover base from the pump.
□ Remove the screws, volute, and seal gasket from the pump.
□ Clean the debris from the impeller and pool cover base. Reassemble.
□ If debris is preventing the float switch from operating properly, remove any debris from the float switch cage on the
side of the pump. The bottom portion of this cage can be removed for further cleaning.
□ Contact the Customer Service Team at 1-844-251-7446 or visit HOMEDEPOT.COM for any replacement parts.
3
2
1
4
5
7
6
8
Do Not
□ Do not disassemble the motor housing. This motor
has NO repairable internal parts, and disassembly
may cause leakage or dangerous electrical wiring
issues.
□ Do not lift the pump by the power cord.
Item
1
2
3
4
5
6
7
8
9
10
11
9
10
11
8
Please contact 1-844-251-7446 for further assistance.
Description
GFCI Plug
Pump casing and motor
Float switch
Impeller
Seal gasket
Washer
Nut
Volute
Volute screws
Pool cover base
Pool cover base screws
HOMEDEPOT.COM
Qty
1
1
1
1
1
1
1
1
8
1
3