Channel List; Add Channels - Magnavox 22MF339B Guia Del Usuario

O
PTIONAL SETTING

Channel List

The channels selected here can be skipped when selecting the channels
+ -
].
using [CH /
Those channels can still be selected with [the Number buttons].
1
Press [MENU] to display the main menu.
2
Use [Cursor K / L] to select "SETUP", then press [OK].
3
Use [Cursor K / L] to select "Channel List", then press
[OK].
4
Use [Cursor K / L] to select the channel you want to
remove, then press [OK].
• The channel display for the removed channel
darkens. You will not be able to select the channel
+
again using [CH
• To reactivate a removed channel, use [Cursor K / L] and
press [OK]. The registered channels are highlighted.
• When you remove a main channel, its subchannels
are removed as well.
Note:
• The channel with the "DTV" indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [MENU] to exit.
20
EN
PICTURE Autoprogram
Channel List
SOUND
SETUP

Add Channels

FEATURES Antenna
LANGUAGE
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
PICTURE
SOUND
SETUP
Highlight channels for Ch Up/Down key
FEATURES
selection.
LANGUAGE
Ch Select Watch/Skip
OK
-
/ ].
Add Channels
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setting.
1
Press [MENU] to display the main menu.
2
Use [Cursor K / L] to select "SETUP", then press [OK].
3
Use [Cursor K / L] to select "Add Channels", then press
[OK].
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [OK].
DTV 11.1
DTV 11.2
DTV 11.3
BACK
Back
5
Press [MENU] to exit.
Note:
• If setup completes successfully,
"Added to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
• By using [CH
channels only.
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
PICTURE
SOUND For analog channels, select a channel to be
added using number keys.
SETUP
For digital channels, you must perform
FEATURES
Autoprogram function.
LANGUAGE
Ch Change
+ -
/ ], you can select the memorized
11
Add channels
BACK
Back