Gpib Interface; Gpib Subsets - Promax GR-205 Manual De Instrucciones

Full List of Addressable RS232 (ARC) Interface Control Codes
02H Set Addressable Mode.
03H Universal Unaddress control code.
04H Lock Non-Addressable mode control code.
06H Acknowledge that listen address received.
0AH Line Feed (LF); used as the universal command and response terminator.
0DH Carriage Return (CR); formatting code, otherwise ignored.
11H Restart transmission (XON).
12H Listen Address - must be followed by an address belonging to the required
instrument.
13H Stop transmission (XOFF).
14H Talk Address - must be followed by an address belonging to the required
instrument.
18H Universal Device Clear.

5.4 GPIB Interface

When the GPIB interface is fitted the 24-way GPIB connector is located on the
instrument rear panel. The pin connections are as specified in IEEE Std. 488.1-1987
and the instrument complies with IEEE Std. 488.1-1987 and IEEE Std. 488.2-1987.

5.4.1 GPIB Subsets

This instrument contains the following IEEE 488.1 subsets:
Source Handshake
Acceptor Handshake
Talker
Listener
Service Request
Remote Local
Parallel Poll
Device Clear
Device Trigger
Page 22
USER'S MANUAL. GR-205
SH1
AH1
T6
L4
SR1
RL1
PP1
DC1
DT0
09/2004