Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Install the toekick after the range has been leveled.
• Measure the distance between the floor and the
bottom of range.
• Loosen the two screws on each end. Adjust the
toekick height by sliding the upper and lower pieces
apart to 1/8" less than the measured height.
Installation
(provided)
Push
• Secure the top and bottom sections by tightening
the 2 screws on each end.
• Push toekick against range leg until clip snaps to
legs.
NOTE: Be sure the toekick snaps securely to the leg.
Top of
Toekick
Bottom
Screw
of Toekick
Push
17

Publicidad

Tabla de contenido
loading

Tabla de contenido