Language Selection - Emerson LC320EM82 El Manual Del Propietario

I
NITIAL SETTING
Note:
• If you connect the cable system directly, contact the CATV
installer.
• If you press [POWER] or [SETUP] during auto channel
scan, the setting will be canceled.
• Channel settings will be saved even if the power fails.
• If you need the English menus instead of the Spanish
or French menus you are having, press [SETUP]. Use
[Cursor K / L] to select "IDIOMA" or "LANGAGE", then press
[ENTER]. Use [Cursor K / L] to select "English", then press
[ENTER]. Press [SETUP] to exit the main menu.
• With regard only to the digital channel, even after the
scanning is complete if you unplug the AC power cord
before turning off the unit by pressing [POWER], the
channel setting may be lost.
14
EN

Language Selection

You can choose English, Spanish, or French as your on-screen language.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "LANGUAGE", then press
[ENTER].
3
Use [Cursor K / L] to select "English", "Español" or
"Français", then press [ENTER].
4
Press [SETUP] to exit.
Language
Language
Select the language for setup display. English
Elija el idioma de ajuste. Español
Français
Sélectionner langue écran config.