SUEZ Sievers InnovOx Manual De Operación Y Mantenimiento página 22

Hazardous reagents (sodium persulfate, hydrochloric acid, and phosphoric acid) are used
in the Analyzer. The waste stream from the instrument is acidic and must be disposed of
properly. Consult your federal, state, and local government regulations.
This is a Safety Class I product. It must be must be attached to a grounded power source.
To avoid damage to the Analyzer and the chance of injury, make sure the Analyzer is
connected to a power line of the proper voltage.
To ensure proper operation and protect against injury, do not operate the Analyzer when its
covers are off.
Any operation requiring access to the inside of the Analyzer, including installation of
maintenance items, could result in injury. To avoid potentially dangerous electric shock or
burning, turn off power and disconnect from the power supply before opening the Analyzer.
Use caution when touching any electronic components.
When handling components that contain sample, standards, waste solution, or reagents,
wear eye protection and gloves.
The display screen may contain mercury and may be considered hazardous material in
your local area. Dispose of this items in accordance with federal, state, or local government
regulations.
Always stop analysis before turning off the Analyzer.
This is a Class A product. In a domestic environment, this product may cause
electromagnetic interference in which case the user may be required to take adequate
measures to correct the interference.
SUEZ © 2018
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
22 / 247 DLM 68088-13 ES Rev. A