SUEZ Sievers InnovOx Manual De Operación Y Mantenimiento página 23

If this instrument is used in a manner not specified by SUEZ, the protection provided by the
instrument may be impaired.
Consult the MSDS that accompanies each standards set and the reagents to identify proper
disposal techniques.
Keep foreign objects away from the Analyzer's fan to avoid introducing hazards into the
Analyzer. The cooling air inlet for the reactor is at the bottom of the Analyzer; do not allow
paper or other objects to block or enter that inlet.
If the Analyzer is used with compressed gases, the pressure of the gas at the gas inlet must
not exceed 6.8 Bar (100 psig). Use only nitrogen or CO
Before analyzing a new sample, refer to Chapter 3, Interferences, for information on
potential interferences and their effect on the Analyzer.
SUEZ © 2018
Warning
Warning
Warning
Warning
-free air.
2
Warning
23 / 247 DLM 68088-13 ES Rev. A