Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Additional features
Forced Operation
The operation will be started operation if the
power button is pressed without remote
controller.
If you want to stop operation, re-press the
button.
Cooling Model
Operating mode
Cooling
Indoor FAN Speed
Setting Temperature
Auto restart
In case the power comes on again after a power failure, the unit operates automatically to the previous operating
conditions.
So there is no need of activating this function by pressing any key or button.
In the initial mode, the fan operates at a low speed and the compressor starts about 3 minutes later.
As the compressor starts, the fan speed also resumes its previous setting mode.
WARNING
: In case of absence for a long time while power failure, turn off main power to avoid undesired Auto
restart.
Helpful information
Fan speed and cooling capacity.
The cooling capacity indicated in the specification is
the value when the fan speed is set to high, and the
capacity will be lower at low or medium fan speed.
High fan speed is recommended when you wish to
cool the room quickly.
20 LG Ceiling Suspended Air Conditioner
Room Temp. ≥ 24°C
Cooling
High
High
22°C
22°C
Heat pump Model
21°C ≤ Room Temp. < 24°C
Healthy Dehumidification
High
Air Intake Temperature
Power
button
Room Temp. < 21°C
Heating
High
24°C
Publicidad
Tabla de contenido
