Other Functions - STEINEL HG 2520 E Manual Del Usuario

5. Memory function [S]
The values selected for the four program's can be changed and memorised at any time. To do this, first
press the program selection button "P" 9 until the display shows the program you wish to change. Set the
temperature and airflow rate you require. The memory symbol
programme selected has been changed. To record this setting in the user program selected, press and hold
down the programme selector button. The memory symbol continues to flash for approx. 2 seconds. The
settings entered have been saved once the memory symbol stays on all the time. To return to normal opera-
tion, press the program selection button until the program symbol disappears from the display.
Temperature measurement on the workpiece
Use the STEINEL HG Scan PRO temperature scanner (Prod. No.: 110033594) for detecting the temperature
at the workpiece.
Heating element
The HG 2520 E hot air tool can be switched off directly after use. There is no need to let the tool cool down
after the work process. This does not affect the heating element's life.
Repair
14
Changing the power cord
Important! Disconnect tool from power supply. Let have electrical repairs only be executed by fully
trained licensed electricians.
If the power cord is damaged, it can easily be changed without opening the casing.
1. Undo screw and pull off cover cap
d a .
2. Release cable grip
b .
3. Undo mains terminals
c .
4. Pull out cable e .
5. Insert new cable and secure in reverse order (1. Firmly screw down mains terminals etc.).
English
on the LCD flashes to indicate that the user
- 8 -
Changing the heating element
The plug-in heating element in the HG 2520 E can be changed in a matter of seconds.
1. 2.
Important! Disconnect tool from power supply.
1. Undo guard sleeve screws and remove guard sleeve (Fig. 1).
2. Undo 4 screws at the end of the hot air outlet nozzle and detach heating element.
3. Replace the heating element with a new one and firmly screw heating element into place (Fig. 3).
4. Firmly screw guard sleeve back on (Fig. 4).

Other functions

LOC function
To avoid altering the chosen settings unintentionally, the HG 2520 E comes with a Lockable Override Control
Function (LOC). To find out how to set the LOC function, please contact our Service Department on
+888-298-8298.
Technical Specifications HG 2520 E
Voltage 120 V, 60 Hz
Output 1750 W max.
Temperature 120-1300 °F, 50 - 700°C continuously variable
Airflow rate 2-13 cfm, continuously variable
Air pressure 3000 Pa
Delivery nozzle Ø 30 mm, using Professional nozzles
Motor life approx. 10,000 hrs.
Heater life approx. 800 hrs.
Residual heat indicator Yes
Power cord Industrial grade rubber, double insulated
Thermal cut-out Yes
Emission sound pressure level ≤ 70dB (A)
Total vibration value ≤ 2.5 m/s
Weight without power cord 0.84 kg
English
3. 4.
/ K = 0.08 m/s
2 2
Subject to technical modifications
- 9 -