Human Touch ZeroG Volito Manual De Uso Y Cuidado página 4

get ready
Unpack the box
Chair Base Backrest Pad
1. Install the backrest.
1. Align the metal tabs on each side of the backrest with the corresponding
slots on the chair base, then push the backrest straight downward firmly
until it clicks into place. TIP: Use two people to keep the backrest level
during installation.
Metal tab
2. Pull upward on the backrest to ensure that it is locked into place.
3. Locate the black safety flap on the bottom of the backrest, then attach
it to the seat canvas using the hook-and-loop fasteners.
IMPORTANT: Be sure to complete this step, as the safety flap
protects against fingers getting pinched.
humantouch.com
Seat Pad Head Pillow
Backrest
Safety flap
4
Setting up your Human Touch Massage Chair is easy.
attach the backrest pad and the head pillow, and you're done!
2. Install the seat cushion.
Place the seat cushion into position against
the backrest, then push down firmly to
secure it using the hook-and-loop fasteners.
3. Install the head pillow.
Zip the head pillow to the backrest.
4. Connect the cables.
Connect each of the two cables from the chair base
to the corresponding connectors on the backrest.
5. Secure the remote control cable
Thread the remote control cable through the
cable guide, to keep it from getting caught
when the chair reclines/inclines.
Just
Seat cushion
Head pillow
Backrest
Control cable
5