Carpet-Bare Floor Selector - Panasonic MC-V7710 Instrucciones De Operación

Carpet/Bare Floor Selector
Sélecteur
tapis/placher
Control para
alfombra/
sin alfombra
To Clean Bare Floor
or Use Tools
Position plancher ou
avec accessoires
Para aspirar sobre un suelo
sin alfombra o usar los
accessoires
To Clean Carpet
Position tapis
Para aspirar sobre
una alfombra
Carpet/Bare Floor Selector
- 26 -
Selector should be placed in BARE
FLOOR (TOOLS) position when using
vacuum cleaner on bare floors and
when using tools. The agitator does
not rotate in the BARE FLOOR
(TOOLS) position.
Selector should be placed in
CARPET position when using
vacuum cleaner on carpeted floors.
NOTE: For longer belt life, turn vacuum
cleaner off before moving selector.
Otherwise, take care when selecting
either position to ensure selector is
pushed as fully and quickly as
possible to desired position.
Failure to do so can cause belt to rub
on selector shaft and result in belt
becoming hot and creating a burning
rubber smell.