Gallagher M1200i Manual De Instrucciones página 17

Gallagher 3E2488 M1200i Energizer User Manual
Adjus ng the energizer output voltage
a) Press the setup bu on (
bu ons ( < or >) to highlight the quickscan bargraph display (it will start
fl ashing).
b) Press (+ or -) to adjust the output voltage up or down. The output voltage can
be adjusted from 4.5KV to 8KV. The factory default se ng is 8KV.
c) To exit the setup mode wait 10 seconds or press the setup bu on (
) to enter setup mode and use the naviga on
Controller showing the output voltage being adjusted
).
17