5.4.4
Driving Times Driver 2
Information is displayed in the same way as described for driver 1 in section 5.4.3.
5.4.5
Speed and Trip Meter
The first line displays the following information from left to right:
Symbol for driver activity.
The card symbol indicates that there is a card in the driver slot. The card symbol is hidden when no
card is inserted.
Trip meter reading of the digital tachograph EFAS.
The card symbol indicates that there is a card in the co-driver slot. The card symbol is hidden when
no card is inserted.
Symbol for co-driver activity.
The second line displays the following information:
Current speed in km/h (mph option available).
Current local time.
Symbol for the current mode.
5.4.6
UTC – Ttime
The first line displays the following information from left to right:
Pictogram for UTC time.
Date.
The field
indicates that the digital tachograph was set for daylight saving time. A hidden DST
indicates that the current setting is standard time.
The second line displays the following information:
Current UTC time.
Currently set time zone (time difference to UTC).
Symbol for the current mode.
5.5
Manual Entries of Activities
If after inserting your driver card you want to manually add your activities, use
the control keys to select YES and press OK.
EFAS will then guide you through the dialog for manual entry of activities.
Firstly, the date and the time (UTC) of the last card withdrawal are displayed
and the question "End of prev. work time?" occurs.
If you want to enter activities which took place immediately after the last withdrawal of the driver card,
select NO. If you want to enter activities which took place immediately before inserting the card, select
YES.
The following dialogs allow the entry of time periods for certain activities (except DRIVING). The dialog
ends with the question "Confirm activities?". Here you may confirm the entered activities (press OK) or
use the control keys to select another option (confirm, discard, print).
10