Displaying The Device Data; 11 Messages And Warnings - intellic EFAS Manual De Instrucciones

10.9

Displaying the Device Data

The software version, production date, and serial number of EFAS can be displayed via the menu.
Select OK
1.
Infos
2. Use control keys
Press OK or
3. to return to the menu.

11 Messages and Warnings

The digital tachograph EFAS outputs different messages and warnings. The warnings are partially ac-
companied by beeps. Messages and warnings are mostly output as plain text using the current display
language and are self-explanatory. This section explains the most important messages and warnings.
Pictograms of events contain always the symbol "!" at the beginning, except the special pictogram of the
speeding event „>>". Pictograms of faults contain always the symbol "x" at the beginning.
Display
19
Version Info
and to browse to the required information.
Meaning
The digital tachograph is refusing to eject a card. The card can only be
ejected when the vehicle has stopped
15 minutes before the end of a 4.5-hour period of driving time. Take a
break within the next 15 minutes.
You exceeded the permissible driving time of 4.5 hours. Take a break.
The temperature inside the printer is too high. Wait until the printer has
cooled down. Then start the print-out again.
You removed the printer module from the digital tachograph. This termi-
nates printing. Remove the printer module only when the display shows
Paper empty.
Printing was aborted via
underway (here: daily reports from card).
No data available for selected printout.
The two inserted tachograph cards must not be used together. Remove
one of the cards.
The inserted tachograph card has a stored withdrawal time. This time is
later than the current time. If this message is displayed, check the actual
time of the digital tachograph.
You exceeded the permissible speed limit for longer than 1 minute.
The power supply of the motion sensor or to the digital tachograph was
interrupted. Have the sensor and/ or the tachograph checked if this mes-
sage occurs repeatedly.
or the vehicle started moving while printing was