Maintenance; Cleaning; Service Intervals - Parker G1 - G9 Guia Del Usuario

G1 - G9

5. Maintenance

The recommended Service procedures identified in table 5.2 and all other repair and calibration work should be undertaken by a domnick
hunter trained, qualified and approved engineer.
5.1

Cleaning

Clean the equipment with a damp cloth only and avoid excessive moisture around any electrical sockets. If required you may use a mild
detergent, however do not use abrasives or solvents as they may damage the warning labels on the equipment.
5.2

Service Intervals

Description Of Maintenance Required
Component
Check POWER ON indicator located
Generator on control panel is illuminated and
cycles from red to green
Check drain valve is discharging on
Generator
a regular basis.
Generator Check for leaks
Check pressure gauges during
Generator
operation
Ensure there is ventilation clearance
Generator
around generator
Check condition of electrical supply
Generator
cables and conduits
Replace filters
Generator
Recommended Service A
Replace compressor (option 1 only)
Generator Models: G2, G3, G4, G7
Recommended Service B
Replace compressor (option 1 only)
Generator Models: G1, G5, G6, G8, G9
Recommended Service B
Replace Valves
Generator
Recommended Service C
Operation
- Check
Table 5.2
14
Typical Recommended Maintenance
Interval
- Replace