Bosch HES7052U Instrucciones De Instalación página 11

2. Remove the terminal block cover to expose the terminal block.
3. Remove top nut, star washer, and round washer from each post.
Note: DO NOT remove last round washer, last nut or internal wiring leads.
4. Attach white wire, round washer, star washer and nut IN THIS ORDER on top
of ground strap on center post.
5. Attach red wire, round washer, star washer and nut IN THIS ORDER to left
post.
6. Attach black wire, round washer, star washer and nut IN THIS ORDER to right
post.
7. Tighten all connections securely and replace terminal block cover.
Figure 11:
8. Properly secure strain relief (see previous section).
ground strap
white
red
Figure 10:
green ground screw
Completed Three Wire Range Cord Connection
Terminal Block
Figure 9:
black
Three Wire Connection
English 9