Cleaning And Care; Troubleshooting - Klarstein Varicook Steel Manual Del Usuario

CLEANING AND CARE

• Before cleaning and servicing the induction hob, unplug it from the power outlet
and allow the hob to cool down!
• Do not let children near the hob until it has cooled down!
• After cooling down, clean the ceramic glass cook top and the control panel of the
hob with a cloth. Use a cloth moistened with dishwasher detergent to clean more
soiled areas.
• Do not use abrasive cleaners (such as abrasive sponges or scouring powder).
• Do not immerse the induction hob and the power cord in water!
• Keep the top of the hob clean all the time to prevent accumulation of dirt around the
fan and its possible failure. Wipe the dust from the area of air circulation openings
using cotton buds or a toothbrush with a small amount of non-aggressive cleaning
detergent and carefully remove oil stains.
• Clean carefully the remnants of cleaning agents off the cook top with damp cloth,
otherwise they can burn when the hob is turned on.

TROUBLESHOOTING

Code Possible Cause
E0 Unsuitable pot/pan
(e.g. diameter smaller than 12 cm)
E1 Induction hob connected
incorrectly/circuit malfunction
E2 Problem with the temperature
sensor.
E3 Overvoltage
E4 Undervoltage
E5 Overheating of the pot bottom
E6 Problem with the fan,
the air inlet and outlet is blocked
Suggested Solution
Place suitable cookware on the
cook top.
Contact a professional.
Contact a professional.
Check the power circuit and find a
suitable power supply.
Check the power circuit and find a
suitable power supply.
Allow the appliance to cool down
and check the pot or pan.
Allow the unit to cool down.
Check and clean the airflow vents.
If the problem persists, contact a
professional.
EN
21