JENN-AIR JCB2058GEB Guia Del Usuario página 22

B
Y
EFORE
PROBLEM
Refrigerator is leaking
water
Ice forms in inlet tube to
ice maker
Water flow is slower than
normal
Water droplets form on
outside of refrigerator
Water droplets form on
inside of refrigerator
C F
OU ALL OR
POSSIBLE CAUSES
Plastic tubing was used to complete water
connection.
Improper water valve was installed.
Water pressure is low.
Freezer temperature is too high.
Water pressure is low.
Improper water valve was installed.
Check gaskets for proper seal.
Humidity levels are high.
Controls require adjustment.
Humidity levels are high or door has been
been opened frequently.
Check gaskets for proper seal.
S
,
ERVICE
CONT
WHAT TO DO
Use copper tubing for installation. Plastic is less durable and
can cause leakage.
Check water connection procedure in the Installation
Instructions. Self-piercing and
water pressure and may clog the line over time.
Water pressure must be between 20 to 100 pounds per square
inch to function properly.
See page 7. Freezer temperature should be approximately
0° F (-18° C).
Water pressure must be between 20 to 100 pounds per square
inch to function properly.
Check water connection procedure in the Installation
Instructions. Self-piercing and
water pressure and may clog the line over time.
Clean, if necessary. See page 16.
Normal during times of high humidity.
See page 10.
Minimize door openings.
Clean, if necessary. See page 16.
22
.
3 " saddle valves cause low
⁄
16
3 " saddle valves cause low
⁄
16