Air Quality Indicator - Winix AAPU500-JLE Manual Del Usuario

04. Air Quality Indicator

Color-coded LED indicates one of three levels of air quality.
• The three levels of air quality are: BLUE (good), AMBER (fair), RED (poor).
05. Sleep Mode Button
The LED "Sleep" light will indicate when Sleep Mode is activated.
• When Sleep Mode is activated, the Air Quality Indicator LED light is disabled.
• When Sleep Mode is activated, the fan speed is automatically set to quiet.
06. PlasmaWave ® Technology Button
Enables or disables PlasmaWave
• When the unit is running, you may hear a chirping or buzzing sound. The sound is from large particles passing
®
through PlasmaWave
• Press the PlasmaWave
07. Fan Speed Indicator / Button
Indicates the current fan speed.
• Use the Fan Speed arrow buttons to set the desired fan speed. Fan speeds cycle over in this sequence: Auto,
Low, Medium, High, Auto.
Low Medium
08. Power Button
Turns the unit on or off. During the first 30 seconds of power, the Air Quality Indicator will cycle through Blue,
Amber and Red colors.
• Smart Sensor takes approximately 30 seconds to gauge the air quality in the environment before normal
operation begins.
English
®
Technology.
Technology, it is normal and does not signify product failure.
®
Technology button, when the unit is on, to enable or disable this feature.
High
AAPU500-JLE 5