Connecting The Power Supply - Stiebel Eltron MINI-E Serie Operación E Instalación

INSTALLATION
1 Hook in the appliance cover
2 Click the heater into place using the snap fastener.
3 Secure the appliance cover with the cover fastening screws.
WWW.STIEBEL-ELTRON-USA.COM
Faucet installation
 Install the connections to the faucet. For this, also observe the 
faucet operating and installation instructions.
Material losses :
!
 When making the connections, counter the torque on 
the appliance using a 14 mm wrench.

10.3 Connecting the power supply

DANGER: Electrocution
Carry out all electrical connection and installation work in
accordance with national, state & local regulations.
DANGER: Electrocution
Ensure that the appliance is grounded.
Ensure the appliance can be separated from the power
supply by a circuit breaker that disconnects all poles.
MINI ™ -E SERIES TANKLESS ELECTRIC WATER HEATERS | 11