Recommissioning; Settings - Stiebel Eltron MINI-E Serie Operación E Instalación

COMMISSIONING

11.3 Recommissioning

Material losses:
!
Following an interruption of the water supply, recommis-
sion the appliance by carrying out the following steps in
order to prevent irreparable damage to the Advanced Direct
Coil™ heating system.
 Deactivate the power supply. 
 See 11.1, "Initial start-up", pg. 12. 

11.4 Settings

You can alter the maximum temperature setting using the potenti-
ometer on the interior of the appliance.
DANGER: Electrocution
The temperature may only be adjusted if the appliance is
isolated from the power supply.
DANGER: Electrocution
The adjusting screw for setting the temperature is live
when the power supply is active.
WWW.STIEBEL-ELTRON-USA.COM
 Remove the appliance cover. 
MINI ™ -E SERIES TANKLESS ELECTRIC WATER HEATERS | 13