Assembly - Briggs & Stratton 26CC Manual Del Usuario

Your backpack sprayer requires minimal assembly and is ready for use after it has been properly serviced with recommended oil and
fuel.
UNPACK THE BACKPACK SPRAYER
1. Remove all components from carton.
2. Ensure you have all included items prior to assembly.
CARTON CONTENTS
Check all contents. If any parts are missing or damaged, call Briggs and Stratton Customer Service for help on 1800 743 4115. If
calling for assistance, please have the model, revision, and serial number from the identification label available.
A package contains the items as illustrated.
1
1. Unit
2. Spray hose assembly (including the handle, seals and cock valve)
3. Three Nozzle wand (including extension rod)
4. Single nozzle wand
NOTE: Some models are supplied with additional accessories such as Operators Manuals, Fitment Packs, Mixing Bottles and Other
Kits and are subject to change without notice.
ASSEMBLE THE BACKPACK SPRAYER
1. Connect the spray hose assembly and the pump outlet
2. Connect the spray hose assembly and spray wands.
3. Install & Ajust the Straps Assembly with the Unit.

ASSEMBLY

3
4
2
ENGLISH
9