Cleaning And Maintenance - Graco SnugRide Classic Connect 35 Manual De Instrucciones

8.3 Cleaning and Maintenance

TO REMOVE AND WASH
INFANT RESTRAINT PAD,
follow instructions in "5.1
Positioning Harness Straps",
pages 20-23 to remove the
harness straps from the metal
junction plate. Push aside the
small tab that holds the anchor
clips in place and pull the
anchor clips out of their
indentations. Remove the
anchor clips from the harness
straps and push straps through
seat slots .
Once seat pad has been removed put anchor
clips back on the harness straps so they do
not get misplaced.
Carefully remove the seat pad. Machine wash on
delicate cycle and drip-dry. DO NOT USE BLEACH.
Reverse steps to reinstall seat pad. Check that harness
system is not twisted, and pull on harness system to be
sure harness is securely reinstalled.
44