Positioning Harness Straps - Graco SnugRide Classic Connect 35 Manual De Instrucciones

5.1 Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN,
SUDDEN STOP OR CRASH. The harness straps must be
properly adjusted to fit your child according to the following
instructions.
1. Remove infant restraint from base and
rotate handle down to sitting position.
See "4.1 Adjusting Handle" and "4.2
Removing and Attaching Infant Restraint",
page. 16.
2. Place child in infant restraint as shown
3. Determine which pair of harness slots are
even with or just below your child's
shoulders
(1.8-2.3 kg) you must use the bottom
slots and the 2-part body support, see
page 18.
4. If the harness straps must be
adjusted: remove child from infant
restraint and move harness straps
to the proper harness slots by doing
the following:
. For infants 4-5 lbs.
20
.
Use harness slots
even with or just below
child's shoulders