Shure SBC200 Instrucciones Importantes De Seguridad página 10

Charging
To charge, place batteries into the charging bays with slotted sides down. The LEDs illuminate to indicate
battery status.
Description LED
Ready for Use
Charging
Warning
* Battery might be too hot or too cold to take a charge.
Note: Store batteries in the charger or in a proper container. To protect terminals from shorting, DO NOT place batteries in a
box or pocket with metal objects such as nails, screws, or keys.
Certifications
Meets essential requirements of the following European
Directives:
• WEEE Directive 2002/96/EC, as amended by 2008/34/EC
• RoHS Directive 2002/95/EC, as amended by 2008/35/EC
Note: Please follow your regional recycling scheme for batteries and
electronic waste
The CE Declaration of Conformity can be obtained from Shure
Incorporated or any of its European representatives. For
contact information please visit www.shure.com
The CE Declaration of Conformity can be obtained from: www.
shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: EMEAsupport@shure.de
4
Color State
Green Charged (99-100%)
Green and Red Charging (90-99%)
Red Charging (0- 90%)
Yellow Battery cannot be charged*
Specifications
Charge Current 0.75 mA
Charge Time
50% = 1 hour; 100% = 3 hours
External Power Supply PS45
Power Requirements 15 V DC, 3.33 A max.
Dimensions 66 x 99 x 165 mm (2.6 x 3.9 x 6.5 in.), H x W x D
Weight 284 g (10 oz.)