Optional Additional Settings; Adding/Deleting Rt And Rts Control Points - SOMFY Lighting Slim Receiver RTS Manual De Instrucciones

Installation guide
- Press the up and down buttons on the RTS control
point simultaneously until the light comes on then
goes out.
- Quickly press the PROG button on the RTS control
point: the light will come on then go out again
to indicate that the RTS control point has been
programmed into the Lighting Slim Receiver RTS.

5. Optional additional settings

5.1 Adding/Deleting RT and RTS control points

5.1.1 RTS control point
Caution! A maximum of 12 control points may be
programmed into a Lighting Slim Receiver RTS.
1) Press the PROG button on the programmed control
point (a) until the light comes on then goes out: the
Lighting Slim Receiver RTS will be in it's program-
ming mode for 2 minutes.
2) BrieÀ y press the PROG button on the RTS
control point (b) to be added/deleted: the light
comes on then goes out; the RTS control point
has been added/deleted.
5.1.2 Inis RT/Inis RTS control point
Caution! A maximum of 12 control points may be
programmed into a Lighting Slim Receiver RTS.
1) Press the PROG button on the programmed control
point (a) until the light comes on then goes out: the
Lighting Slim Receiver RTS will be in it's program-
ming mode for 2 minutes.
2) Form a contact between the metal PROG plate and
the battery bracket for the Inis RT/Inis RTS (c) to be
added/deleted: the light comes on then goes out;
the Inis RT/Inis RTS control point has been added/
deleted.
Copyright © 2008 Somfy SAS. All rights reserved.
Lighting_Slim_receiver_5055439.indb 27 Lighting_Slim_receiver_5055439.indb 27
Lighting Slim Receiver RTS
1 2
PROG.
1 2
PROG. PROG.
a b
+
1 2
PROG. PROG.
a b
1 2
PROG.
PROG.
a
+
c
1 2
PROG.
PROG.
a
+
2 min.
2 min.
+
c
c
2 min.
c
c
2 min.
27
16/06/08 10:15:46 16/06/08 10:15:46