Abicor Binzel AUT-WIG 20G Instructivo De Servicio página 24

3 Product Description
Electrode length
Required cooling unit capacity
Tab. 2 General torch data (EN 60 974-7)
Type Type of Load
cooling
DC
AUT- A
WIG
20G air 200
200W liquid 220
400W liquid 400
Tab. 3 Product-specific torch data (EN 60 974-7)
*According to EN 60 974-7 the value for alternating current (AC) must be given at 70% of the
tested direct current value (DC). All data refer to 4 m hose assemblies. For any further
information regarding the available hose assembly designs and performance data, please refer
to the order documentation.
3.2 Abbreviations
AUT-WIG TIG machine welding torches
AC Alternating current
DC Direct current
Voltage rating Classification of the insulation resistance, voltage strength and protection type
W liquid-cooled
TIG Tungsten Inert Gas
Tab. 4 Abbreviations
3.3 Nameplate
TIG welding torches are marked with an engraving at the torch body. When making any
inquiries, please remember the following information:
• Specify the certificate of conformity, Production stamp on the torch neck, for example AUT
400W, 8-digit order number on delivery note.
EN - 6
ED Elec-
trode 
AC*
A % mm
140 60 0.5 - 3.2 7 - 20
160 100 0.5 - 3.2 7 - 20
280 100 0.5 - 4.0 7 - 20
175 mm
800 W
Gas Cooling
flow
Max. supply
temp.
l/min °C
50
50
AUT-WIG
Torch inlet
pressure
Min. min. max.
flow
l/min bar bar
0.7 2.5 3.5
0.7 2.5 3.5
BAL.0166 • 2019-01-03