Functional Description; Putting Into Operation; Equipping The Tig Welding Torches - Abicor Binzel AUT-WIG 20G Instructivo De Servicio

Sistema de antorcha de soldadura tig
Ocultar thumbs Ver también para AUT-WIG 20G:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5 Functional Description

5 Functional Description
The TIG welding torch is part of a welding system. When supplied with appropriate operating
resources, they produce an arc for welding. In TIG welding, a tungsten electrode and an inert
gas are used. The molten pool and the arc are protected by the inert gas from atmospheric
interferences. The collet body or gas diffuser is used to transmit current to the tungsten electrode.
The ignition of the arc depends on the type of power supply and will therefore not be described
any further. The cable assembly serves as supply line and includes all connection elements.

6 Putting into operation

DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of maintenance,
servicing, mounting, dismounting and repair work:
• Switch off the power source.
• Close the gas supply.
• Close off the coolant supply.
• Close off the compressed air supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
NOTICE
• Please take note of the following instructions
 3 Product Description on page EN-5

6.1 Equipping the TIG welding torches

CAUTION
Risk of injury
Through-hole or puncture caused by sharpened electrode tip.
• Do not reach into the danger zone.
• Wear protective gloves.
EN - 8
AUT-WIG
BAL.0166 • 2019-01-03

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aut-wig 200wAut-wig 400w

Tabla de contenido