Tabla de contenido
Publicidad
No
Category
8
Remote Jack Pack
9
External Source
Bathroom Speaker
10
(HC470 not
support it)
11
Eco Solution
12
Logo/Message
13
Cloning
EU_Install Guide_SPA.indd 31
Hotel TV Function
Item
initial value
Priority AV
1
Priority PC
2
Priority HDMI
3
AV Option
AV
HDMI Option
HDMI 1
USB Pop-up Screen
Default
External Source Banner
ON
Auto source
OFF
Anynet+Return Source
Power On Src
Sub Amp Mode
2
Sub Amp Volume
6
Energy saving
OFF
Welcome Message
OFF
Edit Welcome Message
Hospitality Logo
OFF
Hospitality Logo DL
...
Logo Display Time
...
Clone TV to USB
-
Clone USB to TV
-
Setting Auto Intialize
OFF
Description
If the jack priority is set, the corresponding source is automatically set when
a jack is inserted according to the jack priority
If the jack priority is set, the corresponding source is automatically set when
a jack is inserted according to the jack priority.
If the jack priority is set, the corresponding source is automatically set when
a jack is inserted according to the jack priority.
Select RJP AV Source (Source selection depends on Model).
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/
HDMI2/HDMI3)
When a USB device is connected to the TV :
• Default : A popup window appears.
• Automatic : Opens the USB contents menu automatically.
• Disable : Neither the popup window nor the menu appears.
If set to On, the TV displays the External Source Banner (information) when
you change the TV source to another external input, press the Info key, or
turn the TV on.
• On : The External Source information is displayed on the TV screen.
• Off : The External Source information is not displayed on the TV screen.
• On : When an external input source is connected to the TV, the TV
identifies the input source, and then automatically switches to that input
source.
• Off : Auto Source function is Off.
Select the return TV source after stopping an Anynet+(HDMI-CEC)
connection. (This Function is especially useful for the Guestlink RJP.)
Determines the Sub AMP operation mode.
− 0: Turns the Sub AMP function off (PWM off).
− 1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On
Volume, the Min Volume, and the Max Volume.
− 2: Determines the volume according to the bathroom control panel
setting.
Sub AMP Volume level at power on initial condition.
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Displays a the Welcome Message for 5 seconds when the TV turns On.
Edits the Welcome Message.
Turns the Hospitality logo feature On or Off, If On, when the TV is turned
on, the Logo is displayed, before the signal from the initial source, for the
amount of time set in "Logo Display Time".
Downloads the Hospitality logo. Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Hospitality Logo Display Time (3/5/7 seconds).
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
When Setting Auto Initialize is set to On, and the power is turned off and on
or the Master Power is turned off and on, the data is restored to the cloned
values. If there is no cloned value, even when the Setting Auto Initialize is
set to On, it will be ignored and the operation will be the same as that when
Setting Auto Initialize is set to Off
31
Español
2014-04-14
11:29:13
Publicidad
Tabla de contenido
