Troubleshooting And Maintenance - FujiFilm SonoSite L52 Serie Guia Del Usuario

Troubleshooting and Maintenance

Cleaning and disinfecting transducers
To disinfect the transducer, use the immersion method or the wipe method. You can use the
immersion method only if your disinfectant is compatible with it. Check the product labeling.
For more information about cleaning and disinfecting the L52 transducer, refer to the ultrasound
system user guide.
The following table lists disinfectants that have been tested by SonoSite. See the SonoSite Web site
for updated cleaning and disinfectant information: www.sonosite.com.
Table 18 does not have the following regulatory information for disinfectants:
• EPA Registration
• FDA 510(k) clearance (liquid sterilant, high level disinfectant)
• CE approval
Prior to use, confirm that the regulatory status of the disinfectant is appropriate for
your jurisdiction and use.
Table 18: Disinfectant Compatibility with L52 Series Transducer
Disinfection and
Cleaning Solution
Incidin Plus 1%
AbcoCide 14
Accel Wipes
Aidal Plus
Airkem A-33
Alcohol, Ethyl
Alkacide
Alkazyme
Anios Wipes
Aquatabs (1000)
Country
Type Active Ingredient
of Origin
DEU Liquid Glucoprotamin, Isopropyl
Alcohol
USA Liquid Gluteraldehyde
CAN Wipe Hydrogen Peroxide
AUS Liquid Gluteraldehyde
USA Liquid Quaternary Ammonia
USA Liquid Ethyl Alcohol
FRA Liquid Gluteraldehyde
FRA Liquid Quaternary Ammonia
FRA Wipes Quaternary Ammonia,
Isopropyl Alcohol
IRL Tablet Sodium
Dichloroisocyanurate
L52x L52
L52n L52e
21