General Remarks; Machine Concept; System Requirements; Functional Principle - Fronius IG 400 Manual De Instrucciones

General remarks

Machine concept

The Fronius personal display enables current performance data to be viewed at any time
at any location within a specified distance of the unit.
All that is required to enable data to be sent to the personal display is the relevant
display card with a radio antenna for the Fronius inverter. The power for the personal
display is supplied from batteries or from the power supply unit supplied with the equip-
ment. Performance data from up to 15 Fronius inverter can be shown on the personal
display. The different display modes enable performance data from the whole installation
or from each individual inverter to be viewed.
System require- Fronius IG system requirements for running the Fronius personal display:
ments -
Important! In order to run the personal display, Fronius IG´s with serial numbers up to
14490001 need a main CTRL software version 2.05.00 or higher. A Fronius update card
IG or a Fronius datalogger can be used for this purpose.
-
Functional prin-
ciple
Fig.1
Fronius IG with serial number 14490001 or above
Relevant display card with radio antenna for Fronius IG / IG Plus

Functional principle

2