Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch GSS 23 A Professional Manual Original

Ocultar thumbs Ver también para GSS 23 A Professional:
Tabla de contenido

Publicidad

12 | English
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Always wait until the power tool has come to a com-
u
plete stop before placing it down.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Lock-on button for on/off switch
(3) Complete dust box (Microfilter system)
(4) Rear clamping bracket
(5) Unlocking lever for rear clamping bracket
(6) Sanding plate
(7) Sanding sheet
(8) Release button for front clamping bracket
(9) Front clamping bracket
(10) Extraction outlet
(11) Filter element (Microfilter system)
A)
(12) Dust extraction hose
(13) Punch
(14) Screws for sanding plate
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 4AF | (15.05.2018)

Technical data

Orbital sander
Article number
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
– Clamping tension
Sanding plate dimensions
Weight according to
EPTA Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. For different
voltages and models for specific countries, these values can vary.

Noise/vibration information

Noise emission values determined according to
EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 80 dB(A); sound power level
91 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Total vibration values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2
2
a
= 5.5 m/s
, K = 1.5 m/s
,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
GSS 23 A
3 601 K70 4..
W
190
rpm
12,000
rpm
24,000
mm
2.0
mm
93 x 230
mm
92 x 182
kg
1.7
/ II
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gss 23 a

Tabla de contenido