Accessories - MSA Arneses estilo V-FLEX Instrucciones De Uso

2.4.5 Single Pass Buckle (if present)
Used to secure shoulder straps across user's chest. The free end of the strap must extend beyond the buckle
and be tucked into keeper.
2.4.6 Quick Connect Buckle (if present)
Used to secure shoulder straps across user's chest. The free end of the chest strap must extend beyond the
buckle and be tucked into the keeper.
2.4.7 Double Pass Buckle (If Present)
Used to secure shoulder straps across user's chest. The free end of the strap must extend beyond the buckle
and be tucked into keeper.
2.5

Accessories

2.5.1 Tool Belt Support Straps (if present)
Used for attachment of tool belts and accessories.
2.5.2 Lanyard retainer Clip
Allows snaphook of lanyard to be clipped out of the way, when not in use.
2.5.3 Shoulder Pad & Sub-Pelvic Pad (if present)
Shoulder pad provides comfort while carrying heavy loads in tool bags or work positioning. Sub-Pelvic pad
provides comfort during work positioning or personnel riding applications.
2.5.4 RFID Chip (if present)
Provides a unique alpha numeric code for use in inventory control and inspection tracking.
2.5.5 Dedicated PFL attachment (if present)
Provides a pre-formed webbing loop to easily attached and detach PFLs, such as the V-EDGE PFL and
Workman Mini PFL.
2.5.6 Adjustable Height Waist Pad (if present)
Allows height of the waist pad to be set depending on preference and use application.
2.5.7 Suspension Seat (if present)
The suspension seat attachment elements shall be used as a pair, and shall be used solely for
work positioning. The suspension seat attachment elements shall not be used for fall arrest.
Suspension seat attachments are often used for prolonged work activities where the user is suspended,
allowing the user to sit on the suspension seat formed between the two attachment elements. An example of
this use would be window washers on large buildings.
MSA Harness
US
Close Close
9