Safety Instructions; Personal Safety - STERWINS ECS2-40.3 Manual De Instrucciones

2. safeTY insTruCTiOns

or moving parts. Damaged or entangled cords increase the risk of
3
0
electric shock.
5.When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
6.If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected power supply. Use of an RCD
reduces the risk of electric shock.

personal safety

1.Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
distraction while operating power tools may result in serious personal
injury.
2.Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
3.Prevent unintentional starting. Ensure the switch is in the Off -position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch
or energising power tools that have the switch on invites accidents .
4.Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
5.Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
6.Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
EN
222