Panasonic ER-GN25 Manual De Operación página 10

4
4
Afteruse,slidethepowerswitchto
the"0"positiontoturntheappliance
off.
5
5 Attachtheprotectivecap.
Note
• The outer blade surface may get a little warm
during use, but performance will not be affected.
If you are worried about the blade becoming
warm, let it cool down before use.
10
Clean
Cleaningtheblade
Howtoremovetheblade
1. Make sure the power switch is in the "0" position.
2. Rotate the outer blade in the direction of the
arrow, and align the marks. (Fig. 7)
3. Pull to remove the outer blade. (Fig. 8)
4. Separate the inner blade from the outer blade
carefully. (Fig. 9)