Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments.
2.
Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running
over rated speed can fly apart and cause injury.
3.
Make sure all wheel flanges and other mounting hardware are in good condition and are always used properly. Defective or
missing parts may damage the wheels and other accessories. Always use mounting hardware supplied with the tool.
4.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
5.
Keep hands away from all cutting edges and moving parts.
6.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
7.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and cement and other masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
1.
Side handle
2.
Grinding wheel
3.
Lock lever
4.
Wheel guard
5.
Spindle lock button
6.
Side handle sockets
7.
Paddle trigger (under body of tool)
SPECIFIC SAFETY RULES — SANDERS
Symbology
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
/Direct Current
No Load Revolutions
per Minute (RPM)
Amperes
FUNCTIONAL DESCRIPTION
1
5
2
3
Specifications
Cat.
Volts
No.
A m p s
Watts
AC/DC
5.5
6140-6
600
120
6141
5.5
600
120
5.5
6145
120
600
6
4
Min.
Wheel
Wheel
Spindle
RPM
RPM
Size
Size
Rating
10,000
4 -1/2"
5/8" - 11
12,000
10,000
5/8" - 11
5"
12,000
10,000
1/2" - 13
4 -1/2"
12,000
7
page 3
Publicidad
Tabla de contenido
