Operation; 5.1 Overview; Controls And Components - ESAB LHJ 750 Manual Do Usuário E Pecas De Reposicao

5

OPERATION

5.1 Overview

General safety regulations for the handling of the equipment can be found in section 1. Read
them carefully before you start using the equipment!
ATTENTION!
The definition of the process and its consumable welding procedure (wire, gas) as
well as the results of the operation and application of same are the responsibility of
the user.
ATTENTION!
Do not turn off the power during welding (with charge).
5.2

Controls and components

Front panel
1) ON/OFF switch: allows the operator to turn the machine on and off.
2) Output Negative Terminal: for welding cable connection.
3) Output Positive Terminal: to connect the electrode holder cable
4) Crank: to adjust the welding current value.
5) Pilot Lamp: to show that the equipment is on
6) Socket to connect the auxiliary equipments (220 V)
7) Digital Instrument: to keep the voltage and current values after welding is finished (optional).
8) Scale - To see the welding current.
- 28 -