smartheart 01-554 Manual De Instrucciones página 19

MEMORY FUNCTION
4. Continue to press the M button to scroll through the
measurements in the bank from newest to oldest.
5. Each memory bank stores up to 60 readings; when the
number of readings exceeds 60, the oldest data will be
replaced with the newest record.
6. All results for a given measurement will display,
including measurement results, pulse rate, Hypertension
Indicator and Irregular Heartbeat alert (if applicable).
The date/time stamp is on the top of the display.
7. Press POWER to turn the monitor off at any time
during review of the stored measurements.
Clearing Measurements From Memory
Each memory bank must be cleared seperately. To
delete all results in a given bank:
1. When the monitor is off, press and release the
M button to access the memory bank feature; the
first display is the 'Average' display.
2. Press and hold the M button for 3-seconds; the
display will show CL and 00
3. The memory bank has been cleared and will
show 0 for all areas until a new measurement is
taken.
Fig. 4
ENGLISH • 19