Phonebook - JVC KD-SR83BT Manual De Instrucciones

BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by
voice is also possible if your mobile phone has the feature.
1
Press to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
phone.
"(Second device name)" appears.
2
Turn the volume knob to select an item (see the following table), then press the
knob.
3 2
Repeat step until the desired item is selected/activated or follow the instructions
stated on the selected item.
To return to the previous setting item, press
RECENT CALL (Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone number.
• "<" indicates call received, ">" indicates call made, "M" indicates call missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press the volume knob to call.

PHONEBOOK

(Applicable only if the phone supports PBAP.)
1 Press
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit when pairing.
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as "U".)
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2 Press
1
Repeat steps and
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to control the phone
functions. ( Make a call using voice recognition)
14
ENGLISH
again to switch to another
.
to select the desired letter (A to Z, 0 to 9, and OTHERS).
to move the entry position.
2
until you finish entering the phone number.
Make a call using voice recognition
1 Press and hold to activate the connected
phone.
2 Speak the name of the contact you want to call or
the voice command to control the phone functions.
• Supported Voice Recognition features vary for each
phone. Refer to the instruction manual of the connected
phone for details.
• This unit also supports the intelligent personal assistant
function of iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons
(1 to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL],
[PHONEBOOK] or [DIAL NUMBER], then press the knob.
3 Turn the volume knob to select a contact or enter a
phone number.
If a contact is selected, press the volume knob to show
the phone number.
4 Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when
the contact is stored.
To erase a contact from the preset memory, select
2
[DIAL NUMBER] in step and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO PRESET" appears if there is no contact stored.