Level Adjustment - Sanus OLF18 Manual De Instrucciones

LEVEL ADJUSTMENT

To adjust the
leveling of your TV:
Loosen L
level screw using hex key
26
adjust the TV level, then
,
retighten the
level screw
Loosen
20
CAUTION:
the center postion for concrete applications. The base of the arm
centered in the wall plate
L
.
For wood stud applications:
1. Remove the TV from the arm
assembly
2. Remove the cover plates
the four screws
plate
3. Reposition the arm assembly
on the wall plate.
4. Reattach the four screws
(see STEP 3.1) and replace the
cover plates (see STEP 3.4).
L
5. Hang the TV onto the arm
Tighten assembly
26
TV LATERAL SHIFT
Avoid potential injury or property damage! DO NOT adjust the arm from
17
for concrete applications!
21
.
28
and
22
from wall
26
17
using hex key .
21
22
21
following STEP 3.2.
MUST remain
21
28
26
17
21
28
22