Manuales relacionados para Sanus OLF18
Resumen de contenidos para Sanus OLF18
- Página 1 OLF 18 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853). We’re ready to help!
- Página 2 Does your TV No — Perfect! (including accessories) 140 lbs. weigh more than Yes — This mount is NOT compatible. Visit Sanus.com or call (63.5 kg) 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. 140 lbs. (63.5 kg)? What is your...
- Página 3 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 4 STEP 3.2 Hardware STEP 2 Parts and Hardware Wall Plate Template Locking Screw Lag Bolts TH IS WA Y W E L C O M E A N D T H A N K 5/16 x 2¾ in. 1/4-20 x 5/8 in. Lag Bolt Washers S F O GE T...
- Página 5 STEP 1 Attach TV Bracket to TV 1.1 Measure Your TV Hole Pattern Measure the width and height of your TV hole pattern in cm to determine your TV bracket configuration in STEP 1.2 Record your measurements. idth _____________ cm X eight _____________ cm inches 7 ⅞...
- Página 6 1.2 Assemble Your TV Bracket [cm] [cm] Based on your TV hole pattern measurements For TV Hole Pattern For TV Hole Pattern from STEP 1.1 ( ), determine your Measurements Measurements (Dimensions in cm) (Dimensions in cm) TV bracket configuration: A, B, C, D, E or F. 30.0 x 30.0 40.0 x 30.0 40.0 x 40.0...
- Página 7 [cm] [cm] [cm] For TV Hole Pattern For TV Hole Pattern For TV Hole Pattern Measurements Measurements Measurements (Dimensions in cm) (Dimensions in cm) (Dimensions in cm) 60.0 x 40.0 40.0 x 20.0 20.0 x 40.0 23.62 [60.0] 15.75 [40.0] 7.87 [20.0] 15.75...
- Página 8 1.3 TV Screw Diameter 1.4 TV Screw Length If your TV included inset spacers or wall mount Hand thread screws into the : If your TV has a : Spacers and longer screws are adapters, see Troubleshooting threaded inserts on the back of flat back AND you supplied to accommodate: on PAGE 22.
- Página 9 1.5 Attach TV Bracket Position your TV bracket configuration (A, B, C, D, E or F) onto your TV, making sure the bracket is both centered and level over your TV hole pattern. NOTE: The hanging tab on TV bracket must be oriented toward the top of the TV.
-
Página 10: Wood Stud Installation
14.3 cm 8- 33 cus tom day – 3- 13 er serv Satu Frid ay ice at: rday – Sun day 10:3 – 9 – 7 NOTE: For assistance in calculating wall plate location, try our HeightFinder ™ at Sanus.com... - Página 11 Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit, then remove the wall plate template IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (69.8 mm). Be sure to drill into the center of the stud. Install the wall plate using four lag bolts and washers...
- Página 12 -33 3-1 mer servic Satur ay – Frida 37 6 e at: day – Sund ay 10:30 – 9 – 7 Min. 24 in. (610 mm) NOTE: For assistance in calculating wall plate location, try our HeightFinder ™ at Sanus.com...
- Página 13 Remove the wall plate template and insert four concrete anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install the wall plate using four lag bolts and washers . Tighten all lag bolts only until they are pulled firmly against the wall plate. CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted...
- Página 14 STEP 3 Attach TV to Wall Plate 3.1 Attach Arm Assembly to Wall Plate Position the arm assembly on the wall plate by tilting the top into the wall plate channel , then rotating the bottom toward the wall. NOTE: TV shifts 5.6 in. (14.3 cm) to the right or left when in the home position. Consider this when selecting the location of your wall mount. CAUTION: Avoid potential injury or property damage! For concrete applications, the base of the arm must remain centered in the wall plate...
- Página 15 Secure with four wall plate screws using hex key CAUTION: Avoid potential personal injury or property damage! Screws must be installed to secure arm assembly to wall plate Swing out the first section of the arm assembly Overhead View...
- Página 16 3.2 Attach TV to Arm Assembly HEAVY! You may need assistance with this step. Hang the TV onto the arm assembly by first hooking the hang tab , then resting the TV into place. Lock the TV to the arm assembly with locking screw using hex key CAUTION:...
- Página 17 3.3 Manage Cables Use the supplied cable ties to secure your cables in the positions shown. IMPORTANT: Fully extend arm to ensure you have enough slack in the cables during operation. Install the cable covers over the cables.
- Página 18 3.4 Install Cover Plates Remove any protective film on the cover plates Bow the middle of each cover plate to slip the ends into the channels of the wall plate NOTE: Hex keys can be stored behind the upper cover plate for future use. Before installing the covers, use the hex key to make any necessary adjustments, as shown on pages 19 –...
-
Página 19: Tilt Adjustment
TV Adjustments ROTATE ADJUSTMENT TILT ADJUSTMENT Your TV should adjust easily when moved, then stay in place. Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust either the top If your TV is too loose or too tight, adjust the side tension knob by hand or use hex key tension knob... -
Página 20: Level Adjustment
LEVEL ADJUSTMENT TV LATERAL SHIFT To adjust the CAUTION: leveling of your TV: Avoid potential injury or property damage! DO NOT adjust the arm from MUST remain the center postion for concrete applications. The base of the arm Loosen level screw using hex key centered in the wall plate for concrete applications! - Página 21 REMOVING THE TV REMOVING THE ARM ASSEMBLY HEAVY! You may need assistance with this step. Remove the TV and any cables connected to arm Remove the cover plates by bowing the middle out to release. Disconnect all cables from your TV. Remove the four screws from wall plate using hex key...
- Página 22 Troubleshooting If you are uncertain about your hardware selection, contact Customer Service at 1-800-359-5520. TV Supplied TV supplied spacers Spacers : Use your TV supplied spacer for flat back TVs : Use your TV supplied spacer and spacer (AND you want for: your TV closer to the wall).
- Página 23 Features Adjustment knobs allow fi ngertip control or to restrict movement Fully articulating arm with 3 pivot points, creates optimal viewing positions Level adjustment creates a worry-free installation Fit TV VESA hole patterns from 75 x 75 mm up to TV tilts up 600 x 400 mm or down for...
-
Página 24: Dimensions (In. [Mm])
Dimensions (in. [mm]) 28.5 in. [723 mm] 5.6 in. 3.0 in. [143 mm] [75 mm] OFFSET 23.6 in. [600 mm] 15.8 in. 4° [400 mm] 15° 3.0 in. [75 mm] 15.8 in. 3.9 in. 12.9 in. [400 mm] [100 mm] [328 mm] 7.9 in. - Página 26 No — ¡Perfecto! (incluidos los accesorios) (63.5 kg) pesa más de Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 140 libras 63.5 kg (140 libras)? 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿De qué está...
- Página 27 ESPAÑOL Piezas y accesorios suministrados VER PÁGINAS 3-4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
- Página 28 NOTA: Para ayudar a determinar la posición de la placa mural, pruebe nuestro HeightFinder ™ en Sanus.com 1. Localice los montantes. Verifique el centro de los montantes con un punzón o un clavo delgado, o bien utilice un detector de bordes de montantes.
- Página 29 NOTA: Para ayudar a determinar la posición de la placa mural, pruebe nuestro HeightFinder ™ en Sanus.com 1. Nivele la plantilla de la placa mural y marque la ubicación de los orificios.
-
Página 30: Organizar Los Cables
ESPAÑOL 3,2 Acoplar el televisor al módulo del brazo VER PÁGINA 16 ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. 1. Para colgar el televisor del módulo del brazo , enganche la lengüeta colgante y luego apoye el televisor en su lugar. 2. -
Página 31: Solución De Problemas
Verifique el enrosque adecuado del tornillo o del conjunto tornillo/separador. – Si es demasiado corto, no sostendrá el televisor. – Si es demasiado largo, dañará el televisor. Use los separadores proporcionados con el televisor y los separadores Sanus para: • televisores con dorso irregular o redondeado •... - Página 32 Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 (UK: 0800 056 2853) Email us: info@Sanus.com Leave a review: www.Sanus.com Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.