Initial Use - auna 300-BT Manual Del Usuario

INITIAL USE

Installation
• Unpack all parts and remove all protective material.
• Connect the unit to any household mains socket after checking the
mains voltage and after all other connections have been made.
• Do not cover any vents and make sure that there is a space of several
centimeters around the unit for ventilation.
Top cover assembly
• Push the metal bracket to the rear.
• Connect the metal bracket to the top cover
• Connect the hinge of the top cover to the main unit
Connection
• Connect the power cord o AC outlet and connect the speaker jack to the
speaker terminal located on the rear side of unit.
• Turn the POWER ON/OFF button (19) clockwise until it clicks dinstinctly.
• Switch the function selector (6) to TUNER. If the LCD display (2) lights
up with blue backlight, the power supply is normal and your system is
ready.
EN
27