auna 300-BT Manual Del Usuario página 33

Recording from tape (deck 2 to deck 1)
This unit enables you to duplicate a pre-recorded tape to another tape. It is
performed only one way from deck 2 (playback) to deck 1 (recording).
Dubbing at normal speed:
• Select " Tape " function (6)
• Inset a pre-recorded cassette into deck 2 and a blank cassette tape into
deck 1
• Press the " Pause " key and then press the " Record " and " Play " key at
deck 1.
• Press the " Play " key to start playback at deck 2 & then press " Pause "
key at deck 1 to start dubbing.
• Press " Pause " key at deck 1 & " Stop " key at deck 2 when finish.
Dubbing at high speed:
This unit is equipped with a high speed dubbing system which can save the
time for dubbing by 2/3 when compare to normal speed.
• Press the " Dubbing " button (23) to " Hi " position and then follow the
same procedures as stipu- lated in "Dubbing at normal speed".
• When dubbing a pre-recorded cassette tape at high speed, a chattering
sound is being heard. To avoid this, set the volume control to a
minimum level.
• Do no active/de-active the "Hi-nor. dubbing" button during dubbing,
this will vary the speed of recording and may be damage the cassette
tape.
Recording from radio
• Select " Tuner " function (6).
• Tune to the desire station and insert a blank cassette tape in deck 1.
• Press "Record" & "Play" key to start recording.
• Press "Pause" keys and then "Stop/eject" key when finish.
Recording from phono
• Select "Phono" function (6) and insert a blank cassette tape in deck 1
which suitable for recording.
• Press PAUSE first and then "Record" & "Play" key at cassette. Recording
function is now stand by.
• Start the playback at phono and then press PAUSE on tape deck to start
recording.
• To stop recording, press PAUSE and then "STOP/EJECT on tape deck
first, then return the tone arm back to the rest station at phono.
EN
33