Deleting Files (Usb/Sd, Via Remote Control); Removing Usb Drive / Memory Card - auna 300-BT Manual Del Usuario

Track separation (by remote handset)
You can divide the recording music from phono or tape to USB/SD track by
trace during encoding. Every time when press the (track separation) button
once at remote handset during encoding from phono or tape to USB/SD,
the system will generate a new track and continuous the recording. The text
" PHONO " or " TAPE " at LCD display will flashing one time, it mean the unit
is creating a new track successfully.
DELETING FILES (USB/SD, VIA REMOTE
CONTROL)
Delete single file (USB/SD, via Remote Control)
• Select at "USB" or "SD" mode.
• Press and hold the "Info" button for 3 seconds and the LCD display (2)
will show (del ---001)
• Press Skip forward or Skip backward button to select the file going to
delete
• Press the "REC" button to enter "yes / no" mode and then press skip
forward or skip backward to select "yes" or "no".
• Press the "REC" button again to confirm the setting.
Delete all files
• Select at "USB" or "SD" mode.
• Press and hold the "Info" button for 3 seconds and the LCD display (2)
will show (del ---001)
• Press and hold the "Info" button again and the LCD will show "format /
y/n" and flashing. Then press Skip forward or Skip backward to select "y
(yes)" or "n (no)".
• Press the "REC" button again to confirm the setting.
Remarks: All files inside the USB storage media or SD card will be
deleted completely after confirming to "y (yes)" mode. Press "Stop"
button once at remote handset to quite delete mode

REMOVING USB DRIVE / MEMORY CARD

To remove the USB / memory card, turn off the power or switch the function
mode to either cd, tape or tuner first. For USB port – un-plug it by pulling
out the USB socket directly, for memory card – just pull out the SD card
directly without bending.
EN
37