Charging The Power Pack With The Car Adapter - Silvercrest KH 997 Instrucciones De Uso

Charging the Power Pack with the car adapter

IMPORTANT
Never leave the Power Pack in the car!
► With strong sunlight and a correspondingly heated car interior
the Power Pack could become overheated and be irreparably
damaged.
1. Activate the rechargeable battery test button 2. One to three of
GB
MT the charging indicator 1 LEDs light up and thus shows the current
rechargeable battery status. If all four LEDs light up then the
Power Pack is fully charged.
2. Connect the retractable USB cable u to the car adapter i.
3. Connect the Mini USB plug connection attachment r to the other
end of the retractable USB cable u.
4. Plug the Mini USB plug connection attachment r into the INPUT
DC 5 V 4 socket of the Power Pack.
5. Connect the car adapter i to a 12 V on-board power supply socket
and/or to a 12 V cigarette lighter socket. The charging indicator 1
LEDs blink one after the other and thus indicate that the recharge-
able battery is charging. If all of the charging indicator's 1 LEDs are
constantly alight then the rechargeable battery is fully charged.
6. Disconnect the Power Pack from the car adapter i and pull the
adapter out of the 12 V on-board power supply socket and/or the
12 V cigarette lighter socket.
62
KH 997