Minebea Intec PR6130/65S Manual De Instalación página 63

Hazardous location Class I, II, III, Division 1
Load cell
#1 ... #8
Output parameters:
Ex ia
Intrinsically safe circuit in
type of protection Ex ia
The output parameters are
given by the connected
evaluation unit.
Hazardous location Zone 0 or Zone 1
Load cell
#1 ... #8
Output parameters:
Ex ia or Ex
Intrinsically safe circuit in
ib
type of protection Ex ia
or Ex ib. The output
parameters are given by
the connected evaluation
unit.
Hazardous area Zone 20 or Zone 21
Load cell
#1 ... #8
Output parameters:
Ex ia or Ex
Intrinsically safe circuit
ib
in type of protection Ex
ia or Ex ib. The output
parameters are given by
the connected evaluation
unit.
Note:
1) In the USA: The installation must be in accordance with the National Electrical Code
ANSI / ISA-RP 12.06.01.
In Canada: The installation must be in accordance with the Canadian Electrical Code
2) The apparatus must not be connected to any device that uses or generates in excess of 250Vrms or
DC. U = 250V.
m
3) In the USA: The Apparatus must be connected to a suitable ground electrode per National Electrical
®
Code , NFPA 70, Article 504 or 505. The resistance of the ground pad must be less than 1 ohm.
In Canada: The Apparatus must be connected to a suitable ground electrode per Canadian Electrical
®
Code , Part 1. The resistance of the ground pad must be less than 1 ohm.
For continuing notes see „Safety Instructions", drawing number 36931-751-16.
Datum
Name
Date
Erstellt
29.07.20 Hiller
Written by
Geprüft
03.08.20 Schallhorn
Reviewed by
Freigabe
Schallhorn
03.08.20
Released by
Cable junction box
IS I,II,III/1/A-G T4
-30°C ≤ Ta ≤ 40°C/60°C
Cable junction box
Ex/AEx ia IIC T6/T4
-30°C ≤ Ta ≤ 40°C/60°C
Cable junction box
Ex/AEx ia IIIC T90°C Da
-30°C ≤ Ta ≤ 40°C/60°C
Material
.
Ausgabe / Revision Änderung / Alteration
02 PA50200657
Input parameters:
Intrinsically safe circuit in
type of protection Ex ia
Ui = 25V Pi = any
Ci = 0nF Li = 0mH
Ii Ta Temp.
class
210mA 40°C T6
325mA 60°C T4
370mA 40°C T4
Input parameters:
Intrinsically safe circuit in
type of protection Ex ia or Ex
ib
Ui = 25V Pi = any
Ci = 0nF Li = 0mH
Ii Ta Temp.
class
210mA 40°C T6
325mA 60°C T4
370mA 40°C T4
Input parameters:
Intrinsically safe circuit in
type of protection Ex ia or Ex
ib
Ui = 25V Pi = any
Ci = 0nF Li = 0mH
Ii Ta
325mA 60°C
370mA 40°C
Ben ennun g / Title
Control Drawing (PR6130/64Sa, /64C, /65S)
Zeichnung s-Nr. / Drawing number
36931-731-07
Evalaution unit
with Ex ia output
circuit to the load
cells
Evalaution unit
with Ex ia or Ex ib
output circuit to the
load cells
Evalaution unit
with Ex ia or Ex ib
output circuit to
the load cells
®
, NFPA 70 and
®
, Part1.
Maßstab /
Scale
1:1
Blatt
Sheet
Teildok. Nr./
von
592
Par t doc. no.
of
2
4