mothercare my Choice Instrucciones De Uso página 7

4
attaching the cosy toe
fig 
reversing the seat unit
fig 
1
my3 & my4 chassis languages D0.112-13 12-13
in use
Unclip the shoulder and waist straps
and thread the harness straps through
the corresponding holes in the liner.
Re-attach the harness straps to the clasp.
The front of the cosy toe may be removed
for use in warmer weather.
Press the two buttons located behind
the adjusters as shown and lift the seat.
Turn around and replace into the adaptors.
Adaptors will 'click when installed correctly.
Pull to confirm correct attachment.
Push until adaptors click securely into place.
Pull to make sure they are fully located.
4
using the seat unit in pram mode
WARNINg! Never change the seat unit into pram position with your child in the seat unit.
Note: Do no attach the bumper bar to the seat unit when in pram mode.
fig 4
fig 5
in use
Ensure both adaptors on the chassis frame
are in the up right position as shown.
Turn the seat unit around, and re-attach
in the reclined position.
1
26/9/08 17:58:58