mothercare my Choice Instrucciones De Uso página 8

4
fig 6
fig 
14
my3 & my4 chassis languages D0.114-15 14-15
in use
Squeeze the clasp as shown and recline the
seat to its lowest position.
Undo both the clasps on the underside of the
footrest area of the seat unit. The seat unit will
then be in a flat position.
4
attaching the pram liner and pram apron
fig 8
fig 9
Note: Should you wish to secure your child whilst using the pushchair in pram mode,
thread through the D rings and attach a separate harness complying with BS 6684
or BS EN 110.
WARNINg! When in pram mode do not use an additional mattress.
in use
With the pushchair in pram mode, undo
the four harness clips and move these to
the edge of the pram unit. Remove the hood
and bumper bar.
Place the pram liner into the pram ensuring
that the Mothercare tag is at the head end.
Ensure the hood can still be attached to the
metal frame.
15
26/9/08 17:58:59